The West Highland Line gives you two very different rides out of Glasgow. The rails are shared as far as Crianlarich, but after that the train for Oban heads toward the islands around Mull, while the Fort William and Mallaig route crosses the interior Highlands. The first decision is which station you want at the end of the ride.
The West Highland Line runs from Glasgow Queen Street to Crianlarich, where it splits toward Oban or toward Fort William and Mallaig. Only the Fort William–Mallaig section crosses the Glenfinnan Viaduct. Take the Oban branch for the ferry to Mull, or continue past Fort William toward Mallaig for the viaduct and the ferry to southern Skye.
How to use this article: Start with the destination comparison, check which carriage to board, or see how the ordinary train differs from the Jacobite and how to plan the trip back.
Which West Highland Line train should you take?
For the daytime trains from Glasgow, use Glasgow Queen Street as your starting station, not Glasgow Central. Enter Oban, Fort William or Mallaig as the destination. Pick Mallaig if you want to ride over the viaduct and continue to the end of the line. If you want to get off in the village instead, look for a train that calls at Glenfinnan.
Choose the station for what comes next
| Book to | Approximate rail time | Best for |
|---|---|---|
| Oban | About 3 to 3¼ hours on selected direct trains | The town waterfront or CalMac from Oban’s Railway Pier to Craignure on Mull. |
| Fort William | About 3¾ to 4 hours on selected direct trains | A stay in Fort William, or a separate excursion west. The viaduct is still ahead. |
| Mallaig | About 5¼ to 5½ hours on selected direct trains | The Glenfinnan Viaduct, the harbor at the end of the line, or a separate ferry to Armadale on Skye. |
ScotRail’s published West Highlands timetable checked November 20, 2026. These are rounded rail-only examples, not dated departure promises or ferry connection times. Ordinary direct options require no train change; the journey planner shows when a particular service does.

The time difference is larger than a glance at the map suggests. In one ordinary ScotRail timetable example, the 12:22 departure from Glasgow Queen Street reaches Oban at 15:28, Fort William at 16:09 and Mallaig at 17:44, using the correct train portion for each destination. That is about three hours to Oban, but more than five to the end of the Mallaig branch. Make that distinction before planning a same-day return.
Where the trains divide at Crianlarich
From the Glasgow area the trains follow the same railway through Helensburgh Upper, Garelochhead and Arrochar & Tarbet, then run near the north end of Loch Lomond toward Ardlui and Crianlarich. Shared track is not a promise of identical stops: check the calling points if you board somewhere other than Glasgow Queen Street.
Check the carriage, not just the platform
ScotRail marks some services as dividing at Crianlarich. That means two portions leave Glasgow coupled together and are uncoupled at the junction. If you are in the portion for your booked destination, you stay on board. Check the carriage display or ask staff before boarding rather than assuming the first or last carriage always goes to Oban. A journey explicitly shown with a change is different: follow that itinerary.
The split also explains why the village of Tyndrum has two station names. Tyndrum Lower is on the Oban branch and Upper Tyndrum is on the Fort William and Mallaig branch. A pickup arranged at the wrong one will not be at the platform when you arrive.
The Oban branch and the ferry to Mull
Beyond Tyndrum Lower, the Oban branch descends west past Dalmally, skirts Loch Awe and continues through Taynuilt and Connel Ferry. This is the branch to pick if your plan ends in Oban or continues by boat to Mull. It never reaches Fort William or the Glenfinnan Viaduct.
At Oban, the station and CalMac’s Railway Pier terminal are close, but the walk to the terminal is only part of the transfer. If crossing to Mull, check Oban–Craignure separately and plan to reach ferry check-in before its deadline. Craignure is the landing, not Tobermory; if you are going to another part of Mull, allow for the onward journey as a separate leg. The Glasgow-to-Oban rail and ferry guide explains how to allow time between your train’s arrival and ferry check-in.
Fort William, Glenfinnan and Mallaig
The other branch leaves Crianlarich for Upper Tyndrum and Bridge of Orchy before reaching Rannoch and Corrour. Here the rail journey crosses an open interior landscape rather than following the road through Glencoe. The railway then approaches Fort William through Spean Bridge.
West of Fort William, the line heads past Banavie and Loch Eil before crossing the viaduct on the approach to Glenfinnan from the east. The viaduct is the bridge you cross on the train; Glenfinnan is the station to choose for visiting the area on foot. A booking that ends at Fort William does not include this stretch. In Mallaig, the ferry to Armadale lands in southern Skye, not Portree, so check your onward bus or pickup as well as the sailing.
The regular ScotRail train and the Jacobite
Ordinary ScotRail trains between Fort William and Mallaig cross the same viaduct when running as trains. The Jacobite is a separate seasonal excursion sold by West Coast Railways as a return trip from Fort William. It is not a scheduled ScotRail service, and the operator does not offer one-way tickets for the excursion. Use ScotRail for a one-way journey to Mallaig or a trip that continues to the ferry.
Booking the return and handling service changes
Work backward from your last connection
Start with the last useful return train, or the ferry check-in if you are continuing to an island. Then choose an outward rail service that gives you enough time on the ground. An evening arrival at Mallaig may still suit an overnight stay, but it is not a good basis for assuming you can catch a boat the same day. If both rail branches are part of one trip, search the actual route between your two destinations rather than treating the branches as an end-to-end loop.
A line on the map remains the railway even while engineering work changes the service. For example, National Rail listed replacement buses between Glasgow Queen Street and Crianlarich from November 21 to 24, 2026, and showed rail service continuing between Crianlarich and Oban and between Fort William and Mallaig during the works. Use your date-specific itinerary for the full chain of train and bus legs. If boarding assistance or a bicycle space matters, confirm that the replacement trip can accommodate it.
Frequently Asked Questions
Can I walk to the Glenfinnan visitor center from the station?
Yes. The National Trust for Scotland describes a signposted hillside walk of about 1.5 miles (2.4 kilometers) from the station via the viaduct to its visitor center. It is a different outing from riding over the bridge. Check the return train before you leave the station and use the Trust’s accessibility guide to judge the hillside route.
How do I use a request stop on the Mallaig branch?
Check the timetable symbol on the specific service. Stops marked as request stops, such as Lochailort on the standard timetable, work differently from a booked call at a major station. Tell train staff if you want to get off there and check the operator’s boarding instructions if you are starting there.
Can I take a bicycle on the West Highland Line?
ScotRail requires cycle reservations on the West Highland Line. Reserve for the specific journey and check each leg, including the return. Do not assume that a service carries the extra-capacity Highland Explorer carriage or that a replacement bus can take the bike.
Does my rail confirmation also confirm my ferry?
Only if your purchased itinerary explicitly includes the ferry. If you booked a rail ticket to Oban or Mallaig on its own, check the sailing with CalMac and keep the ferry details separate, including the departure port and check-in deadline.
What Did We Learn Today?
The West Highland Line shares tracks from Glasgow Queen Street to Crianlarich, then takes one branch west to Oban and another through Fort William to Mallaig. Glenfinnan is on the latter branch, beyond Fort William. Book to the place you actually need, confirm your carriage on a train that divides, and check any onward ferry or last return before choosing your departure.
Sources & Data Notes
Checked November 20, 2026: ScotRail West Highlands timetable, National Rail engineering notice, West Coast Railways Jacobite, CalMac Oban–Craignure, CalMac Mallaig–Armadale, National Trust for Scotland Glenfinnan access, ScotRail cycle reservations. Printed timetable examples are not day-specific bookings.
Photograph: Train approaching Corrour station, Thomas Nugent / Geograph / CC BY-SA 2.0. Converted to WebP without cropping; derivative remains under CC BY-SA 2.0.
Map: GeographyPin; railways, stations, and lochs from OpenStreetMap contributors (ODbL) via Geofabrik’s Scotland extract; relief from AWS Terrain Tiles. It shows the physical railway and selected stations, not timetables or guaranteed stops.
